17-05-2018
IFAT 2018. Munich. Germany
04-05-2018
IFAT 2018 14-18 MAY
31-08-2015
International Specialized Exhibition of Import Sub...
17-07-2015
Association of water supply and disposal of Moscow...

WHEN DEHYDRATOR HYDRIG - DEHYDRATOR HYDRIG

To order this equipment You can by phone 8 800 301-01-88 (toll-free in Russia)
SEND REQUEST FOR SELECTION OF EQUIPMENT

Bag dehydrator works on the principle of non-pressure filtration. It is intended for dehydration of sediments and sludge obtained from wastewater treatment containing heavy metals, petroleum products, oils, vegetable and animal fats, surfactants, suspended solids, as well as for separation of sludge mixture after biochemical treatment. 

Treated with polymer (flocculants) sediments and sludge are evenly distributed in bags of one-time use and after a few hours of filtration they reach a dehydration level of about 20-30% depending on the type of sediment.
The high-performance device is characterized by universality of application, low power consumption, simplicity of operation. It is particularly suitable for small and medium-sized treatment plants.

Operating conditions of the equipment at temperature: from 5 º C to + 50 º C.
IMG_0014.png
All elements of the device are made of corrosion-resistant materials. Housing, mixer, clamp clamps are made of stainless steel, pipelines – polypropylene. Filter bags are made of special hydrophobic porous woven material.

IMG_0030.png IMG_0028.png

The device consists of a housing with removable protective panels and fixed filter bags and clamps for fixing them. In the upper part of the installation there is a mixer-dispenser, in the lower part there is a grate and a bottom with a slope, a drain and a supply pipe.

The sludge is fed into the mixer by means of a pump. Flocculant can be introduced into the supply pipeline by means of dosing pump (if necessary). Then the sludge is distributed in the porous filter bags secured by hose clamps. The sediment is trapped in the bags, and filtered water flows by gravity through the discharge pipe into the head of the treatment facilities. From overflow, the collecting tank is protected by an overflow pipeline by a cross-section of DN = 40 mm.

To order this equipment You can by phone 8 800 301-01-88 (toll-free in Russia)
SEND REQUEST FOR SELECTION OF EQUIPMENT

The choice of reagents for the intensification of the dehydration process is carried out by experimental selection

Type

MO 1

MO 2

MO 3

Length (mm)

800

1300

1800

Height (mm)

1800

1800

1800

Width (mm)

660

660

660

Dry weight (kg)

200

400

600

Number of bags (pieces)

1

2

3

The volume of sediment 99% dehydrated for the cycle (m3)

1-1.5

1.5-2.5

2.5-4

Residual moisture content of dehydrated sludge (%)

70-85

70-85

70-85

Thank you!
Your request has been sent.