17-05-2018
IFAT 2018. Munich. Germany
04-05-2018
IFAT 2018 14-18 MAY
31-08-2015
International Specialized Exhibition of Import Sub...
17-07-2015
Association of water supply and disposal of Moscow...

DOSEURO DOSING PUMPS - Solenoid Diaphragm Pump of SDP series

Steel execution of pump head and valves for aggressive liquids is available.

dose3.jpg

1.       Diaphragm

2.       Electromagnet

3.       Valve

4.       Manual stroke adjustment

5.       Control circuit board

6.       Adjustment knob

7.       Connector

8.       Power supply board


    Pump type

Capacity, max.

Pressure, max.

Power consumption, kW

Weight, kg

115

5 l/h

15 bar

0,037

3,5

210

7 l/h

10 bar

0,037

3,5

220

5 l/h

20 bar

0,058

3,5

507

8 l/h

7 bar

0,037

3,5

512

10 l/h

12 bar

0,058

4,1

810

13 l/h

10 bar

0,058

4,1

154

17 l/h

4 bar

0,058

4,1

203

22 l/h

3 bar

0,058

4,1

Solenoid dosing pumps of SDP series are designed for precise and continuous dosing in a wide range of capacities. Pump construction ensures high accuracy and reproducibility of results according to requirements of water treatment and oil and gas industry standards. All the pumps are CE certified.

Technical characteristics:

  • Pump head execution is PP, PVDF or SS 316;
  • Dosing pump is foot mounted ;
  • Standard power supply is 220 V, 1 phase (24 V, 12V or 110V on request);
  • Pump housing is made of reinforced corrosion-proof polypropylene;
  • Protection class is IP65.

Capacity adjustment:

SMC / SML

Analogic dosing pump. The capacity of the pump is adjusted manually in the range of 10-100% of double regulating scale.

SMM

Digital dosing pump. The capacity is regulated by a microprocessor. It has manual flow rate adjustment with a 3 digit display in the range from 0-100%.

SSC

Digital dosing pump. The capacity is regulated by a microprocessor and a 3 digit display. The capacity is adjusted by an incoming signal configured by user between 0 and 20mA.

SWM

Digital dosing pump. The capacity is regulated by a microprocessor and a 3 digit display. Capacity is adjusted manually or in proportion with a digital signal (flowmeter with output signal). Different signal adjustments are possible: pulse multiplier: 1xn; pulse divider: 1:n; pulse differentiator 1 x n-M; level control setting (supplied without probe).

SSW
Digital dosing pump. Operating function is regulated by a microprocessor and a LCD 12X2 display. Different signal adjustments are possible: pulse multiplier 1xn; pulse divider 1:n; pulse differentiator 1 x n-M.

SPH

Dosing pump with a built-in pH measurement instrument (the pH meter is not included in the standard set). Capacity is regulated by a microprocessor and a 4 digit LCD display. pH measurement and potential control range between 0,00 – 14,00 PH with a temperature range between 0 –100°. The ON/OFF mode is proportional to the signal. The output signal is 4-20 mA. 

SRX

Dosing pump with a built-in Rx measurement instrument (the Rx meter is not included in the standard set). Redox-potential and the difference between potentials are between 0 - 1000mV. Capacity is regulated by a microprocessor and a 4 digit LCD display. The ON/OFF mode is proportional to the signal. The output signal is 4-20 mA.

SCL

Dosing pump with a built-in CL measurement instrument (CL meter is not included in the standard set). Capacity is regulated by a microprocessor. CL measurement and concentration control range from 0,00-10,00 ppm (mg/l). ON-OFF mode is proportional to the signal. The output signal is 4-20 mA.

SCD

Dosing pump with a built-in CD measurement instruments (CD meter is not included in the standard set). Capacity is regulated by a microprocessor and an LCD display. The conductivity measurement ranges between 0-1000 and 0-10.000 micro siemens. It has temperature compensation. ON-OFF mode is proportional to the signal. The output signal is 4-20 mA.

Thank you!
Your request has been sent.