17-05-2018
IFAT 2018. Munich. Germany
04-05-2018
IFAT 2018 14-18 MAY
31-08-2015
International Specialized Exhibition of Import Sub...
17-07-2015
Association of water supply and disposal of Moscow...

FRIESS OIL SKIMMERS - FRIESS Oil Skimmer Model WBS

The WBS oil skimmer is specifically designed to remove floating oil from small tanks. The unique design of the belt skimmer WBS collects the oil from the whole surface. The belt touches the surface nearly horizontally and creates a movement on the water surface in such a way that the oil is driven towards the oil skimmer. This is a unique design of Friess WBS oil skimmer.

Прайс_Скиммер_2011_Страница_2_Изображение_0002.jpg

Advantages:

  • The belt hits the water horizontally and not vertically. The horizontal belt creates a movement on the water surface and the oil will be collected from a much bigger area than with conventional belt skimmers.
  • The oil skimmer needs a very small surface of only 100 mm x 100 mm.
  • Vertical or inclined mounting is possible, which makes it easy to adapt to small coolant tanks.
  • Oil skimmer can be mounted on top of the tank or at the side of the tank.
  • The payback is fast because of longer lifetime for the coolant or degreasing bath.
  • It requires low maintenance because of strong design and corrosion-proof materials such as stainless steel.
  • Groves are mounted in the transport rolls to deal with dirt particles in the oil.
  • The lifetime of the best is longer because the belt is manufactured an one piece. 
  • Maintenance cost is low because of special seals for bearing.
  • It has strong design with a reliable gear motor.
  • It has a low weight for mobile use at different tanks.
  • The oil skimmer comes with a switch cable and a plug and is ready to use.

Technical data for WBS 10 model:

Drive power: 0,09 kW
Voltage: 230V 1 phase
Oil capacity: up to 2 – 15 l/h
Width of the belt: 40 mm
Length of the belt: 1150 mm
Temperature: max. 60 °C
Dimensions: 80x305x540 mm
Surface of basin: min. 100 x 200 mm
Lifting height: 110 mm
Weight: 8 kg

Technical data for WBS 20 model:

Drive power: 0,09 kW
Voltage: 230V 1 phase
Oil capacity: up to 2 – 15 l/h
Width of the belt: 40 mm
Length of the belt: 1500 mm
Temperature: max. 60 °C
Dimensions: 80x305x755 mm
Surface of basin: min. 100 x 200 mm
Lifting height: 350 mm
Weight: 10 kg

Thank you!
Your request has been sent.