The 1U oil skimmer is specially designed to remove floating oil from small coolant tanks and small degreasing baths with a surface of up to 1 m². The innovative working principle makes sure that the oil is collected at the whole surface of the basin.
The oil collector tube creates a movement on the water surface. The floating oil moves on the water surface and will be attracted by the oil collector tube and transported into the oil skimmer. Scrapers inside the oil skimmer remove the oil from the surface of the oil collector tube. The oil runs from the scraper into the oil collecting pan and from there into a waste oil tank.
The oil skimmer can be mounted up to 600 mm high above the water surface. Because of the strong construction, the 1U oil skimmer can be used continuously. In order to avoid wear caused by particles like sand, chips and others in the oil, all parts of the oil skimmer that touch the oil collector tube are made of wear resistant ceramic or hardened stainless steel. All other parts of the oil skimmer except the drive wheel are made of corrosion resistant stainless steel.
The 1U oil skimmer can be adapted to nearly all applications. The angle of inclination is adjustable. Depending on viscosity and thickness of the oil layer, the 1U oil skimmer has the oil capacity of up to 30 l/h. Many different options allow you to adapt the 1U oil skimmer to nearly all kind of applications. The oil skimmer comes with a switch cable and a plug and is ready to use.
Oil capacity: 2-30 l/h
Surface of basin: min 400*400 mm
Installation height above liquid: max. 600 mm
Working temperature: -200C up to +950C
Drive power: 0.09 kW
Voltage: 230 V
Weight: 9 kg
Dimensions incl. oil collecting pan L*W*H: 224*228*270 mm